Emaar Hand Car Wash - Harrow

CAR VALETING PROCEDURE AT EMAAR CARS

Pre-Wash Vehicle Exterior

This usually consists of the wheelarches, door and boot shuts, filler cap recess and lower half of the vehicle being sprayed with an all-purpose cleaner solution.  This is allowed to settle for approximately 30 seconds before being rinsed off with the pressure washer. The main reason for doing this is to get rid of any loose grit and the dirt.  Ensuring that it will not be moved across the body of the vehicle during the wash stage.

Wheels Cleaned

At Emaar Cars we normally use a non-acidic wheel cleaner, this is safer for your wheels as it does not cause damage. We use brushes to agitiate the product and ensure that all parts of the wheel are cleaned. Wheel cleaning will be done in more than one stage, as the wheels need to be dried down after the final main body of the vehicle gets washed.

Main Body of the Vehicle

Using a range of product from Meguiars and Frog we will wash the paintwork of your vehicle using non-scratch washmitts.  Once this stage is complete, we pressure wash the vehicle off

Final Rinse & Dry

We will rinse the entire vehicle down to remove any remaining product, before a final rinse with filtered water.  Then the vehicle will be dried with microfibre drying towels

Polish & Sealant/Wax

We will polish the vehicle. This is to enhance the appearance. Often a vehicle will have a dull appearance and the polish will enhance the paint in order for the shine to appear on all pain works of the vehicle. We will then use high quality products that are often used in detailing rather than valeting which will lead to a better, and longer lasting, finish.

Tyres & Trim Dressed

It's these little touches at Emaar Cars that make everything work perfect together. The untreated trim will often deteriorate and cause damage to the paintwork of the vehicle. Dressing the trim restores it's appearance.  Then the tyres are dressed, with the oil in order to shine and protect the rubber.  Enter your busines